GIGAVision Technology

Resistive ~ Standard Specifications (1.5″ – 10″)

Mechanical Properties
Structure	Top: ITO thin films
	Lower: ITO glass
	Glass substrate: thickness (thickness: 1.1mm, 1.6mm, 1.8mm, 2.5mm, 2.8mm)
Out cable connection	FFC ( FPC optional )，crimpflex connector
mode of operation	Pen touch and hand touch
Activation Force	≦ 50g ( stylus =R0.8 )
range of size	Of 1.5 “~ 10″ (provided products of the proportion of other customized)

Electrical Characteristics
operating voltage	3.3V to 5V ( DC )
Circuit Resistance	20~500 Ω
linearity	Standard linear error of ≦ 1.5%
Insulation Resistance	≧ 20 MΩ/25V( DC )

Optical Characteristics
Transmittance	≧ 80 ± 2%, in measuring the wavelength of under 550nm
degree of atomization	Antiglare Finish：( 9.5±2 )%

Environmental Characteristics
operating temperature	-10℃～+70℃
Storage Temperature	-40℃～+85℃
constant temperature and humidity test	60℃/90%RH for 240 hrs
Hot and cold loop test	-40℃～+80℃ ( 60min./cycle ) * ( 100 cycles )
Professional Certification	RoHS

Durability
surface hardness	≧ 3H ( JIS 5400 )
Lifetime	Percussion can be a single point of more than 200 million
warranty	3 years

Attribute	civilian use	Industry
linearity	≦ 1.5%	≦ 1.5%
Insulation Resistance	≧ 20MΩ/25V(DC)	≧ 20MΩ/25V(DC)
Lifetime	35 million touches<, /SPAN>	35 mill, ion touches
operating temperature	-10°C～ +70°C	-30°C ～+85°C
Storage Temperature	-40°C ～+85°C	-40°C ～+90°C
constant temperature and humidity test	60°C / 90%RH / 240 hrs	85°C / 90%RH / 1000 hrs
Heating test	70°C / 240 hrs	85°C /1000 hrs
low temperature test	-40°C /240 hrs	-40°C / 1000 hrs
Hot and cold loop test	-40°C ～+80 ℃ (60 min./cycle) *100 cycles	-40°C ～+80 ℃ (60 min./cycle) *100 cycles
Out cable connection	FFC / FPC	FFC/FPC
surface hardness	≧ 3H(JIS 5400)	≧ 3H(JIS 5400)
Activation Force	≦ 50g Stylus	≦ 50g Stylus
Structure	Film / Glass	Film / Glass
Transmittance	≧ 80± 2%(measured by BYK-Gardner)	≧ 80 ± 2% (measured byBYK-Gardner)
Degree of atomization	Clear Finish ≦ 4.5% or Antiglare Finish ( 9.5 ± 2% )	Clear Finish ≦ 4.5% or Antiglare Finish( 9.5 ± 2% )

Resistive ~ Standard Specification (1.5″-10″)